Q-BOOST
Safety
Data
Sheet

Note on the translation: An automatic machine translation of this document is made possible in this page, while a human translation is prepared. Use the contact form if you wish to receive a human translation of this document.

CONTENT

1. Identification of the substance / mixture and of the company / undertaking
2. Hazards identification
3. Composition / information on ingredients
4. First aid measures
5. Fire suppression measures
6. Accidental release measures
7. Handling and storage
8. Exposure control/individual protection
9. Physical and chemical properties
10. Stability and reactivity
11. Toxicity information
12. Ecological information
13. Disposal considerations
14. Transport information
15. Regulatory information
16. Other information

 

 

SECTION 1. Identification of the substance / mixture and of the company / undertaking

1.1 Product identifier

Trade name: Q-Boost

Other means of identification: No other identifiers

 

1.2 Relevant identified uses of the substance or mixture and uses advised against Application of the substance / the mixture

Surface impregnation for professional use

Uses advised against: Q-Boost is solely intended for the treatment of surfaces with N-Boost by Silestone®. Other uses are advised against.

1.3 Details of the supplier of the Safety Data Sheet

COSENTINO S.A.U. Ctra. A334 Baza-Huércal Overa, km 59 04850 Cantoria (Almería) – España Phone: +34 950 444 175 E-mail: info@cosentino.com Website: www.cosentino.com

Distributor for Australia: Cosentino Australia Pty Ltd. 270 Beech Road, Casula Nsw 2170 Phone: 02 8311 1516

Distributor for USA/Canada: C&C North America,Inc. 355 Alhambra Circle, Ste. 1000 Coral Gables, FL 33134 Phone: 786-686-5060

1.4 Emergency telephone number

ChemTel Inc. (24/7, multilingual): Worldwide: +1-813-248-0585
United States: 1-800-255-3924 (toll free)
Australia: 1-300-954-583
China: 400-120-0751
India: 000-800-100-4086
Mexico: 01-800-099-0731
Brazil: 0-800-591-6042

SECTION 2. Hazards identification

2.1 Classification of the substance or mixture. Classification according to Regulation (EC) No 1272/2008

The product is not classified as hazardous according to the CLP regulation.

2.2 Label elements

Labelling according to Regulation (EC) No 1272/2008 Not Regulated

Hazard pictograms Not Regulated.

Signal word Not Regulated.

Hazard statements Not Regulated.

Additional information Safety data sheet available on request.

2.3 Other hazards

There are no other hazards not otherwise classified that have been identified.

Results of PBT and vPvB assessment:

PBT: Not applicable.

vPvB: Not applicable.

SECTION 3. Composition / information on ingredients

3.1 Mixtures

Components:

CAS: 67-64-1 EINECS: 200-662-2 Index number: 606-001-00-8 Reg.nr.: 01-2119471330-49-XXXX	Acetone Flam. Liq. 2, H225 Eye Irrit. 2, H319; STOT SE 3, H336	1-5%
CAS: 67-63-0 EINECS: 200-661-7 Index number: 603-117-00-0 Reg.nr.: 01-2119457558-25-XXXX	Propan-2-ol Flam. Liq. 2, H225 Eye Irrit. 2, H319; STOT SE 3, H336	1-<3%

Additional information
For the wording of the listed Hazard Statements refer to section 16.
For the listed ingredient(s), the identity and/or exact percentages are being withheld as a trade secret.

SECTION 4. First aid measures

4.1 Description of first aid measures

After inhalation:

Supply fresh air; consult doctor in case of complaints.

After skin contact:

Immediately rinse with water.

If skin irritation is experienced, consult a doctor.

Wash contaminated clothing before reuse.

After eye contact:

Remove contact lenses if worn.

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

After swallowing:

Rinse out mouth and then drink plenty of water.

Do not induce vomiting; call for medical help immediately.

4.2 Most important symptoms and effects, both acute and delayed

No further relevant information available.

4.3 Indication of any immediate medical attention and special treatment needed

No further relevant information available.

SECTION 5. Firefighting measures

5.1 Extinguishing media

Suitable extinguishing agents:

The product is not flammable.

Use fire extinguishing methods suitable to surrounding conditions.

For safety reasons unsuitable extinguishing agents:

Water with full jet.

5.2 Special hazards arising from the substance or mixture

Formation of toxic gases is possible during heating or in case of fire.

5.3 Advice for firefighters

Protective equipment:

Wear self-contained respiratory protective device. Wear fully protective suit.

SECTION 6. Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures 

Use respiratory protective device against the effects of fumes/dust/aerosol. Use personal protective equipment as required.

Ensure adequate ventilation

6.2 Environmental precautions

No special measures required.

6.3 Methods and material for containment and cleaning up

Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Send for recovery or disposal in suitable receptacles.

6.4 Reference to other sections

See Section 7 for information on safe handling.

See Section 8 for information on personal protection equipment. See Section 13 for disposal information.

SECTION 7. Handling and storage

7.1 Precautions for safe handling

Store in cool, dry place in tightly closed receptacles.

Avoid splashes or spray in enclosed areas.

Avoid contact with the eyes and skin.

7.2 Conditions for safe storage, including any incompatibilities

Requirements to be met by storerooms and receptacles:

Store in cool, dry conditions in well sealed receptacles.

Information about storage in one common storage facility:

No further relevant information available.

7.3 Specific end use(s) 

No further relevant information available.

SECTION 8. Exposure controls / personal protection

8.1 Control parameters

	Acetone (CAS# 67-64-1)	Propan-2-ol (CAS# 67-63-0)
IOELV (EU)	Long-term value: 1210 mg/m³, 500 ppm
WEL (Great Britain)	Short-term value: 3620 mg/m³, 1500 ppm Long-term value: 1210 mg/m³, 500 ppm	Short-term value: 1250 mg/m³, 500 ppm Long-term value: 999 mg/m³, 400 ppm
OEL (Ireland)	Long-term value: 1210 mg/m³, 500 ppm IOELV	Short-term value: 400 ppm Long-term value: 200 ppm
INSHT (Spain)	Short-term value: 1210 mg/m³, 500 ppm Long-term value: 1210 mg/m³, 500 ppm	Short-term value: 1000 mg/m³, 400 ppm Long-term value: 500 mg/m³, 200 ppm
VME (France)	Short-term value: 2420 mg/m³, 1000 ppm Long-term value: 1210 mg/m³, 500 ppm	Short-term value: 980 mg/m³, 400 ppm
VL (Belgium)	Short-term value: 1000 mg/m³, 400 ppm Long-term value: 500 mg/m³, 200 ppm	Short-term value: 1000 mg/m³, 400 ppm Long-term value: 500 mg/m³, 200 ppm
HCIS (Australia)	Short-term value: 2375 mg/m3, 1000 ppm Long-term value: 1185 mg/m3, 500 ppm	Short-term value: 1230 mg/m3, 500 ppm Long-term value: 983 mg/m3, 400 ppm
ACGIH	Short-term value: 1000 ppm Long-term value: 750 ppm	Short-term value: 400 ppm Long-term value: 750 ppm
OSHA (USA)	Short-term value: 1000 ppm Long-term value: 750 ppm	Long-term value: 980 mg/m3, 400 ppm
NIOSH (USA)	Long-term value: 250 ppm	Short-term value: 1225 mg/m³, 500 ppm Long-term value: 980 mg/m³, 400 ppm

To obtain up-to-date specific limits or limits for countries not listed here, please consult a competent health and safety professional or the local regulatory authority of the country in question.

DNELs: No further relevant information available.
PNECs: No further relevant information available.

8.2 Exposure controls

General protective and hygienic measures:

The usual precautionary measures are to be adhered to when handling chemicals. Wash hands before breaks and at the end of work.

Avoid contact with the eyes.

Avoid close or long term contact with the skin.

Respiratory protection:

Not required under normal conditions of use.

For spills, respiratory protection may be advisable.

Protection of hands:

Appropriate gloves are advised to avoid contact.

Wear protective gloves to handle contents of damaged or leaking units.

Material of gloves:

Nitrile rubber, NBR (mere recommendation, contact glove manufacturer for more information)

Eye protection:

Follow relevant national guidelines concerning the use of protective eyewear.

Body protection:

Protective work clothing

Limitation and supervision of exposure into the environment:

No further relevant information available.

Risk management measures:

No further relevant information available.

SECTION 9. Physical and chemical properties

9.1 Information on basic physical and chemical properties

Appearance

Form: Liquid

Colour: Milky-white

Odour: Citrus

Odour threshold: Not determined

pH-value: 5,0

Melting point/freezing point: Not determined

Initial boiling point and boiling range: Not determined

Flash point: Not applicable

Flammability (solid, gas): Not applicable

Auto/Self-ignition temperature: Not determined

Decomposition temperature: Not determined

 

Explosive properties: Product does not present an explosion hazard.

Explosion limits

Lower: Not determined.

Upper: Not determined.

Oxidising properties: Non-oxidising.

Vapour pressure: Not determined.

 

Density

Relative density: 0,9928

Vapour density: Not determined.

Evaporation rate: Not determined.

Solubility in / Miscibility with water: Fully miscible.

Partition coefficient: n-octanol / water: Not determined.

 

Viscosity

Dynamic: Not determined.

Kinematic: Not determined

VOC content: 6%

 

9.2 Other information

No further relevant information available.

SECTION 10. Stability and reactivity 

10.1 Reactivity

No further relevant information available.

10.2 Chemical stability

Thermal decomposition / conditions to be avoided:

No decomposition if used and stored according to specifications.

 10.3 Possibility of hazardous reactions

No dangerous reactions known.

10.4 Conditions to avoided

Excessive heat.

10.5 Incompatible materials

No further relevant information available.

10.6 Hazardous decomposition products

No dangerous decomposition products known.

SECTION 11. Toxicological information

11.1 Information on toxicological effects

Acute toxicity: Based on available data, the classification criteria are not met.

LD/LC50 values relevant for classification: None. Primary irritant effect

Skin corrosion/irritation: Based on available data, the classification criteria are not met.

Serious eye damage/irritation: Based on available data, the classification criteria are not met.

Respiratory or skin sensitisation: Based on available data, the classification criteria are not met.

IARC (International Agency for Research on Cancer): None of the ingredients are listed.

Probable routes of exposure: Ingestion. Inhalation. Eye contact. Skin contact.

Germ cell mutagenicity: Based on available data, the classification criteria are not met.

Carcinogenicity: Based on available data, the classification criteria are not met.

Reproductive toxicity: Based on available data, the classification criteria are not met.

STOT-single exposure: Based on available data, the classification criteria are not met.

STOT-repeated exposure: Based on available data, the classification criteria are not met.

Aspiration hazard: Based on available data, the classification criteria are not met.

SECTION 12. Ecological information

12.1 Toxicity

Aquatic toxicity: No further relevant information available.

12.2 Persistence and degradability

No further relevant information available.

12.3 Bioaccumulative potential

No further relevant information available.

12.4 Mobility in soil

No further relevant information available.

 12.5 Results of PBT and vPvB assessment

PBT: Not applicable.

vPvB: Not applicable.

12.6 Other adverse effects

No further relevant information available.

SECTION 13. Disposal considerations

13.1 Waste treatment methods

Recommendation

The user of this material has the responsibility to dispose of unused material, residues and containers in compliance with all relevant local, state and federal laws and regulations regarding treatment, storage and disposal for hazardous and nonhazardous wastes.

Uncleaned packaging:

Recommendation: Disposal must be made

according to official regulations.

SECTION 14. Transport information

14.1 UN-Number

DOT, ADR/RID/ADN, IMDG, IATA Not Regulated

14.2 UN proper shipping name

DOT, ADR/RID/ADN, IMDG, IATA Not Regulated

14.3 Transport hazard class(es)

DOT, ADR/RID/ADN, IMDG, IATA

Class Not Regulated

14.4 Packing group

DOT, ADR/RID/ADN, IMDG, IATA Not Regulated

14.5 Environmental hazards:

Marine pollutant: No

14.6 Special precautions for user

Not applicable.

14.7 Transport in bulk according to Annex II of Marpol and the IBC Code

Not applicable.

SECTION 15. Regulatory information 

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture

IARC (International Agency for Research on Cancer)

None of the ingredients are listed.

Directive 2012/18/EU

Named dangerous substances – ANNEX I

None of the ingredients are listed.

Other regulations, limitations and prohibitive regulations

Substances of very high concern (SVHC) according to REACH, Article 57

None of the ingredients are listed.

15.2 Chemical safety assessment:

A Chemical Safety Assessment has not been carried out.