Note on the translation: An automatic machine translation of this document is made possible in this page, while a human translation is prepared. Use the contact form if you wish to receive a human translation of this document.
COSENTINO® PROLINE
Q-BOOST
Recommended exclusively for N-BOOST by Silestone®
Product:
Q-Boost
Application:
Surface impregnation for professional use.
Recommended for:
Restore N-Boost properties,
Remove oil and grease residues.
Instructions for use:
Spray Q-BOOST over affected area. Spread using paper or white scotch pads applying light pressure. Leave for 20 seconds and remove any excess product with paper. Wet surface to check if damaged area is still visible. Repeat as needed, please note that after leaving for 20 seconds and before removing excess with paper, a scotch or other gentle cleaning pads can be used over stained area to remove persistent marks. Use of appropriate gloves is advised.
For professional use. EUH210 Safety data sheet available on request. Check the information in your language in osh.cosentino.com.
Emergency response number:
ChemTel Inc. 24/7, multilingual: Worldwide +1-813-248-0585 / United States: 1-800-255-3924 (toll free) / Australia: 1-300-954-583 / China: 400-120-0751 / India: 000-800-100-4086 / Mexico: 01-800-099-0731 / Brazil: 0-800-591-6042
Cosentino S.A.U. / Crta. A-344 Baza – Huércal Overa, km. 59, 04850 Cantoria – Almería, Spain.
+34 902 444 175 / +34 950 44 41 75 atencion@cosentino.com
Cosentino S.A.U. / Crta. A-344 Baza – Huércal Overa, km. 59, 04850 Cantoria – Almería, Spain.
+34 902 444 175 / +34 950 44 41 75 atencion@cosentino.com